Automatic visual inspection machine for large oil or shaft seals.
The part is loaded, manually or by an automatic system, onto the belt and then the piece is placed onto the rotating table. The pick and place system places the piece onto a rotating plate.
Each inspecting unit performs a specific visual control of the piece and due to a turnover system, the innovative machine can inspect both sides of the piece. Parts are unloaded by a ‘pick and place’ system onto a belt and rejected parts are separated in a special bin.
If you’re interested in another visual inspection machine from Doss USA that allows your company to inspect mega o-rings and cables, see our dSort 7 model.
|Type||Rigid circular parts|
|Typical piece||Big oil seal, shaft seal|
|Characteristics||Clean, free of dust or particles that may alter the part’s profile|
|Size||60 mm ID – 280 mm OD|
|Cross section/Height||4 – 25 mm|
|Max frame field*||30 mm (line)|
|Camera resolution||2048 pixel/line|
|Cycle time||Up to 320 pz/h|
|Type of feeding||Automatic/Manual|
|Type of machine||Transfer table|
|Noise level (for elastomers)||< 75 ㏈|
|Three phase power supply||230 – 480 v|
|Max installed power||3.5 Kw|
|Average consumption||2 Kw|
|Compressed air consumption||200 NL/Min|