dSort 6
Automatic visual inspection machine for large oil seals or shaft seals.
The part is loaded, manually or by an automatic system, onto the belt and then the piece is placed onto the rotating table. The pick and place system places the part onto the innovative handling system, which rotates the part. Each visual unit performs a specific inspection of the part.
Rejected parts are conveyed in a bin and good parts are unloaded by a pick & place system onto a belt.
If you’re interested in another visual inspection machine with expanded capabilities from this one, see our dSort 6s model.
Controls
Profile control
Cut and break control
Surface control
Characteristics
Statistic and report
Traceability of
production lots
Remote management
M.E.S. compatible
Customizable for special projects
Technical specifications
Piece
| Type | Circular metal rubber / Rigid thermoplastic |
| Color | All, non-transparent |
| Typical piece | Big oil seal, shaft seal |
| Characteristics | Clean, free of dust or particles that may alter the part’s profile |
| Size | 120 mm OD |
| Cross section/Height | Up to 20 mm |
Vision
| Resolution | 0.019 mm/pixel |
| Zoom | No |
| Camera type | Linear |
| Max frame field* | 20 mm (line) |
| Camera resolution | 2048 pixel/line |
Performance
| Cycle time | Up to 360 pz/h |
| Type of feeding | Automatic/Manual |
| Type of machine | Transfer table |
| Noise level (for elastomers) | < 75 ㏈ |
| Three phase power supply | 230 – 480 v |
| Max installed power | 3.5 Kw |
| Average consumption | 1.4 Kw |
| Compressed air consumption | 200 NL/Min |
